Please conform to product regulations such as safety and radiation regulations , and maintain a safe servicing environment by.
Use genuine parts. Be sure to use important parts for safety. When you solder while repairing, please be sure that there are no cold solder and other debris. Soldering should be finished with the proper quantity. Refer to the example. Please be sure that all screws are fastened, and that there are no loose screws. Please be sure that all connectors are inserted, and that there are no imperfect insertion. Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc. Please check that neither solder debris nor screws remain inside the product. Damaged power cords may lead to fire accidents, so please be sure that there are no damages. If you find a damaged power cord, please exchange it with a suitable one. When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure.
Replaced only with the same or equivalent type recommended by the manufacture. Discord used batteries according to the manufacture's instructions. Please be sure to confirm and follow these procedures. Product safety Please conform to product regulations such as safety and radiation regulations , and maintain a safe servicing environment by following the safety instructions described in this manual.
Use genuine parts. Be sure to use important parts for safety. When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. Refer to the example 4 Make sure the screws are tightly fastened. Please be sure that all screws are fastened, and that there are no loose screws. Please be sure that all connectors are inserted, and that there are no imperfect insertion. Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc. Please check that neither solder debris nor screws remain inside the product. Damaged power cords may lead to fire accidents, so please be sure that there are no damages. In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures. Please conform to product regulations such as safety and radiation regulations , and maintain a safe servicing environment by.
Use genuine parts. Be sure to use important parts for safety. When you solder while repairing, please be sure that there are no cold solder and other debris. Soldering should be finished with the proper quantity. Refer to the example. Please be sure that all screws are fastened, and that there are no loose screws. Please be sure that all connectors are inserted, and that there are no imperfect insertion.
Please replace the wiring and cables to the original state after repairs. In addition, be sure that there are no pinched wires, etc. Please check that neither solder debris nor screws remain inside the product.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages. Understanding built-in CD player error. MP3 additional information WMA additional information WAV additional information About this unit.
The tuner frequencies on this unit are allo-. Do not allow this unit to come into contact. Electrical shock could result. Also, this unit damage, smoke, and overheat. Keep this manual handy as a reference for op-. Always keep the volume low enough so that.
Protect this unit from moisture. If the battery is disconnected or discharged,. If this unit does not operate properly, contact. You can play back MP3 files recorded on CD-. Supply of this product only conveys a li-. An inde-. The Windows Media" logo printed on the box. WMA data can be encoded by using Windows.
0コメント